Product Categories

Zhejiang Hutian Rubber Belt Co.,Ltd

Address:No.2 East Gongnan Road, Eyuan Industrial District, Tiantai County.

Contact:JENNY ZHOU

TEL:+86-576-83080788

Phone:+8613958500415

Fax:+86-576-83080666

E-mail:rubberbeltfactory@126.com

Web:http://rubberbeltfactory.com

Home > News > Content
Conveyor Belt Lap Way
- May 24, 2017 -

 Conveyor belt lap way

  Conveyor Belt Conveyor belt according to the thickness of the belt and the characteristics of the belt itself has a different way of overlap, there are several ways

  1. Hot-melt connection ring - this is a more traditional and more cumbersome lap way, process: open material, layered teeth, welding fixed joints, the machine hot melt, which is also called teeth Then Tooth connection and sub-single and double-tooth, double teeth are generally suitable for PVC conveyor belt. The PU conveyor belt itself is thin, in order to achieve more accurate size, usually single-tooth connection, the error is small, good stability, high accuracy. Tooth connection is more suitable for the belt with a thin belt, (0.8-7.0mm can be selected tooth connection) with the tube thickness changes, lap is also different. Slightly thicker belts, such as 7.0-13.5mm thick belt, need to choose a layered lap.

  Conveyor Belt Conveyor belt through the above process, the general connector is relatively strong, suitable for a variety of thickness of the various lines of the belt.

  2. Steel buckle lap --- This lap way is relatively simple, install, find, easy to disassemble, save time. Suitable for a variety of width, a variety of thickness of the belt, without the need for complex installation tools. Aiba industrial belt steel buckle belt using the US sailing plate steel buckle machine operations, with ordinary steel buckle or butterfly buckle or wolf teeth deduction, then the belt on both sides with steel core connected.

  3. Cold connection --- cold connection is the use of belt layered way, with glue to the belt together. This method is simple and not durable, very few people use. Because the joint position is the weakest place of a belt, without any treatment of the process, with adhesive glue, if the tension is high, then this overlap is often not taken.